Keeping Skate Blades Rust-Free Through Summer
Most Australian families encounter skate rust during the Southern Hemisphere summer, when hockey and figure skating programs pause and boots spend weeks in a garage, shed or bedroom cupboard. Indoor rinks may still operate, but school holidays, work schedules and warm weather often leave blades unused for extended periods. The risk is greater around coastal homes, where salty clothing and damp air settle on equipment, and in inland areas such as Canberra, where cold nights followed by warmer days encourage condensation.
A reliable storage routine takes only a little preparation. Blades need to be clean, completely dry and lightly protected before they are placed in a ventilated storage area. The same basic care suits community hockey, ringette, floorball and figure skating programs, including clubs such as Finland’s Lapinlahden Luistin. Attention now protects the glide, keeps edges smooth and prevents a short storage period from turning into an expensive repair.
Why Summer Storage Matters in Australia
Rust forms when moisture remains on metal and is exposed to oxygen. Skate guards can create a moist pocket around a blade, while salt and road grime make the surface more corrosive. A pair may look clean when it is put away but develop orange spots along the holder, toe pick or blade edges during the following weeks. Those spots can affect glide and make the blade feel rough underfoot.
Australian conditions can accelerate this process. Melbourne winters are often damp, while Brisbane brings persistent humidity that encourages condensation inside closed bags. Canberra may have frosty mornings followed by warmer afternoons, causing moisture to form on metal stored near a window. Even a dry climate does not eliminate the problem because damp boots, towels and clothing can all release moisture inside a storage area.
Rust also makes the return to ice less pleasant. Small pits can catch the ice and produce an uneven slide, while corrosion around the blade holder may spread toward the sharpened section. Checking stored skates every few weeks is much simpler than dealing with deep staining, damaged coatings or blades that need professional sharpening before use.
Clean the Blades Before Storage
Start by removing each skate’s guards and giving the blades a quick look. Wipe away visible dirt with a clean microfibre cloth or soft paper towel. If dirt is stubborn, use a lightly dampened cloth with a small amount of mild dish soap, then dry the blade immediately. Do not soak the blade, submerge the boot or run water into the blade holder.
Pay particular attention to the space beneath the guard and around the blade holder. This is where grit and moisture collect, and it is also where early corrosion often begins. A narrow cleaning brush or soft toothbrush can help, provided it will not scratch the blade or its factory coating. The boot should remain completely dry during this process.
Avoid harsh cleaners, wire wool and strong abrasives unless the skate manufacturer specifically approves them for that blade type. Some figure skating blades have protective coatings that can be damaged by aggressive rubbing. Precision hockey blades also have a narrow hardened edge, so unnecessary sanding may remove material that should remain intact. When in doubt, follow the blade maker’s care instructions.
Dry the Metal Completely
After cleaning, leave the skates in a ventilated room with the guards removed. A soft cloth can speed up the drying process, but the blades should be left in open air rather than packed tightly together. Check both sides of the blade, the holder and the underside of the toe pick, since these areas can retain moisture longer than the visible faces.
A five-minute arvo check at the kitchen table can help with this last stage. Lay the skates on a towel, loosen the laces and allow the inner boots to air out. Remove the insoles or liners if the manufacturer permits it, and place them separately so they can dry. Socks and any spare guards should also be washed and dried before going near the stored equipment.
Once everything is dry, apply a thin layer of corrosion-inhibiting product designed for skate blades. These products are available from specialist skate retailers and Australian online marketplaces. Wipe away excess so the protector does not coat the running surface or hardened edge. Avoid household oils and greases, which can collect dirt, alter the glide or make the blade slippery.
Protect Blades and Choose a Safe Home
The best storage place is dry, ventilated and away from chemicals. A shelf in a tidy garage is usually more suitable than a sealed plastic bin, especially if the skates still contain the slightest moisture. Keep blades away from lawn mowers, fuel, pool equipment, fertiliser and cleaning products. A concrete floor can also transmit damp, so a wooden shelf or stable rack provides a better barrier.
Australian homes often combine a garage with a separate garden shed, and both can experience large temperature changes. An attic may be dry, but summer heat can expand protective coatings and damage adhesives elsewhere on the boot. Inside the house, avoid a cupboard beside an exterior wall or laundry where humidity may collect. Coastal households should keep skates away from an open garage door where sea spray can settle.
For clubs with multiple pairs of skates, an inventory in shared equipment records can show when each blade was inspected, cleaned and protected. Label each pair with its owner, blade type and storage date. This prevents forgotten equipment from remaining damp while also helping coaches identify a pair that is ready for the next training session.
Keep Boots, Guards and Equipment Together
Store the boots in a breathable skate bag rather than wrapping them tightly in plastic. Plastic traps moisture, and a bag containing a damp liner can create exactly the conditions rust needs. Make sure the guards are fully dry before they are refitted, and do not place wet gloves or towels inside the same bag. Cardboard boxes can also absorb moisture and attract insects, so they are better used only for dry accessories.
Sharpening equipment deserves similar protection. Blades should never be left resting directly on a stone, grinder or rough workbench, where the edge may be damaged. Keep sharpening tools clean and dry, and store them separately from the blades. If the skates have removable blade holders, check that all screws remain secure without over-tightening them.
Before putting the skates away, tighten or loosen the laces in the way that allows the boot to hold its shape without compressing the liner. Remove stones and grit from the sole, since they can scratch the blade or lodge near the holder. Dry spare laces completely as well, and ensure that moisture-absorbing footbeds are not left rolled up inside the boot.
Check the Stored Skates Periodically
Make a monthly inspection part of the household or club routine. Remove the guards, look for early orange marks and run a clean white cloth along the blade. If a faint trace appears, dry the blade and apply another light coat of the approved protector. Do not wait until rust is visible on the running surface, because corrosion can begin beneath the guard and spread unnoticed.
The timing of checks matters in Australia. Inspect the skates before a humid storm, a spell of wet weather or a period away from home. Clubs that close for the Northern Hemisphere summer may store equipment for several months, while Australian programs can pause for only a short break. The longer the skates remain unused, the more useful a scheduled inspection becomes.
Off-season training can keep athletes engaged while their skates are safely stored. At Lapinlahden Luistin, junior players can pair the break from ice time with off-season strength training, then return to skating with their equipment prepared rather than neglected.
When the skates come back out, allow them to reach room temperature before inspecting the edges. Wipe away any residue, check for nicks and confirm that the blades are ready for the ice. A skate sharpener can address a blunt edge, but aggressive filing cannot repair deep rust pitting. If the running surface feels uneven, have a qualified technician assess the blade before play.
On your next trip to the rink, place every pair of skates on a dry towel, wipe the blades clean and record the inspection date in the storage checklist.